Référence: RDSL500118
Marque: RDX RACEDESIGN
RDX Sideskirts Tuning FORD Mondeo 2014-2019 & 2019+ "Slim"
Set for both sides. Made of ABS plastic. Black highgloss. Includes TUEV approval and installation accessories.
Paiement sécurisé / Paypal / 4xCB
Tous nos colis sont assurés
U-Diff universal rear diffusor by RDX:
Delivery content:
> U-Diff rear diffusor
> TUEV approval
> Mounting kit
> Installation instruction
U-Diff article- und quality features:
The U-Diff is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.
The installation of the U-Diff rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.
The main design of the bumper remains unchanged. The U-Diff rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.
The U-Diff rear diffusor is TUEV approved. The TUEV approval is naturally included in the delivery content.
The width of the U-diff rear diffusor is 52.5 cm. This corresponds approximately to the level of a normal-euro plate.
Spacers could be used at installation of the U-Diff rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.
The U-Diff rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.
Référence: RDSL500118
Marque: RDX RACEDESIGN
Set for both sides. Made of ABS plastic. Black highgloss. Includes TUEV approval and installation accessories.
Référence: RDFAVX30809
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDFAVX30808
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDSL562
Marque: RDX RACEDESIGN
Set for both sides. Made of ABS plastic. Black highgloss. Includes TUEV approval and installation accessories.
Référence: RDFAVX30257
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDFAVX30857
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDFAVX30942
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval. Fit for models with the shown original front bumper, e.g. Trend, Cool & Connect, Titanium und Titanium X. Fit not for models with other original front bumpers, e.g. ST-Line, ST-Line X, Vignale.
Référence: RDHL028
Marque: RDX RACEDESIGN
Made of PUR plastic. Includes TUEV approval and adhesive tape.
Référence: RDSL300021
Marque: RDX RACEDESIGN
Set for both sides. Made of ABS plastic. Includes TUEV approval and installation accessories.
Référence: RDFAVX30709
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDFAVX30668
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDDS144
Marque: RDX RACEDESIGN
Made of PUR-IHS plastic. Includes TUEV approval and adhesive glue.
Référence: RDFAVX30888
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDFAVX30735
Marque: RDX RACEDESIGN
Made of PUR plastic. Comes with mounting kit and TUEV approval ABE.
Référence: RDDX153
Marque: RDX RACEDESIGN
Made of PUR-IHS plastic. Includes TUEV approval ABE and adhesive glue.
Référence: RDSL400021
Marque: RDX RACEDESIGN
Set for both sides. Made of ABS plastic. Includes TUEV approval and installation accessories.